Place the originals face up into the original supply tray until the original set indicator (1)
2.
is lit.
#
IMPORTANT
Do not add or remove originals while they are being scanned.
When scanning is complete, remove the originals from the original output tray to
avoid paper jams.
#
NOTE
When you are enlarging an A4 or B5 original onto A3 or B4 paper, place the
original horizontally.
The scanned originals are output to the original output area in the order they are
fed into the feeder.
Feed originals to the ADF (optional)
Chapter 7 - Copy jobs
189