Create A Shared Network Folder On A - Canon imagePRESS C7010VPS Operating Information Manual

Note:
Instead of 12.34.56.78 you must enter the host name or IP address of the PRISMAsync
controller. Booklet is the name you gave to the hotfolder when you created the automated
workflow.
Click 'Finish'.
5.
A log in screen will appear.
Enter the user name and the password that were defined when the hotfolder function
6.
was enabled in the Settings Editor.
Click 'OK.'
7.
The hotfolder is now ready for use.
If desired, you can create a shortcut to the shared network folder on the desktop of the
8.
workstation.
Introduction to automated workflows, on page 319
Introduction to hotfolders, on page 325
Activate the hotfolder function, on page 326
Create a hotfolder, on page 327
Create a shared network folder on a workstation, on page 328
Create a hotfolder default ticket ('default_ticket.jdf'), on page 330
Create a shared network folder on a workstation
Chapter 10 - Adapt printer settings to your needs 329