Calibrate the printer - '2. Auto gradation adjustment'
Perform the '2. Auto gradation adjustment' procedure separately
Touch 'System' -> 'Color management'.
1.
Press '2. Auto gradation adjustment'.
2.
Touch one of the following options.
3.
'Full adjustment' (recommended)
'Quick adjustment'
From the 'Calibration method' window, select 'Automatic (internal sensor)' and touch
4.
'OK'.
An instruction window opens.
Wait a few minutes while the printer performs the '2. Auto gradation adjustment'.
Remove the test prints.
5.
Press 'OK'.
6.
Press 'Finish'.
7.
Calibrate the printer - 1. Shading correction, on page 345
Calibrate the controller - 3. Media family calibration, on page 349
348
Chapter 11 - Maintenance and calibration