Other Errors - Toshiba e-STUDIO520 Service Handbook

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

Other errors

1) Operation cannot be performed (operation from the control panel is not successful) after installing

the option(s) such as Wireless LAN module, Scrambler board and/or Parallel board.

Check if the optional board is installed properly.

2) The connection to the Wireless LAN cannot be made even though it is set to "Enabled".

The connection state and settings of the Wireless LAN can be checked with [USER FUNC-

TIONS] → [ADMIN] → [WIRELESS LAN] → [SETTING CHECK].

Confirm the settings with the administrator.

* "NIC INITIALIZING" does not disappear at the time of the power being turned ON and it dis-

appears after 6 minutes with the NIC initializing time-out. In this case, the connection to the

Wireless LAN did not succeed even though "NIC INITIALIZING" disappears.

* The connection to the Wireless LAN cannot be made if the Access Point to be connected is

not found or security settings are not correct.

e-STUDIO520/523/600/603/720/723/850/853

TROUBLESHOOTING

Show Quick Links

Table of Contents