Toshiba e-STUDIO520 Service Handbook page 539

(Updating all the items is taken as an example and explained in the following procedures.)
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version to be updated is "V1.03 / 8.30" or earlier:
Status display during update
OS Update .......
UI Data Update .......
SysFirm Update .......
LSR Update .......
PFC Update .......
Engine MAIN Update
Scanner Firm Update
When the FROM basic section software version to be updated is "V1.04 / 2.38" or later:
Status display during update
OS UI Update .......
LSR Update .......
PFC Update .......
Engine MAIN Update
Scanner Firm Update
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-14
Status display when update is completed
OS Update
UI Data Update
SysFirm Update
Flash Update LSR Update
PFC Update
.. Flash Update Engine MAIN Update
.. Flash Update Scanner Firm Update
Fig. 6-15
Status display when update is completed
OS UI Update
Flash Update LSR Update
PFC Update
.. Flash Update Engine MAIN Update
.. Flash Update Scanner Firm Update
6 - 15
06/09
....... Completed
....... Completed
....... Completed
....... Completed
....... Completed
.. Completed
.. Completed
....... Completed
....... Completed
....... Completed
.. Completed
.. Completed
e-STUDIO520/523/600/603/720/723/850/853
FIRMWARE UPDATING
6