High-Fusing Mode - Toshiba e-STUDIO520 Service Handbook

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

High-fusing mode

When the fusing level needs to be raised, it can be set at the setting mode "08".

Level up at 1st printing

Changing the setting of the pre-running time for first printing

The level is raised by delaying the time for the 1st printing and extending the time to warm the

fuser roller. At this code, the time to delay is set.

First printing time with plain paper

First printing time with thick paper 1

First printing time with thick paper 2

First printing time with thick paper 3

First printing time with OHP

Level up at continuous printing.

The level for the continuous printing is set at the "high-fusing mode (08-433)". The level is raised

by delaying the printing cycle and controlling not to lower the fuser roller temperature.

The setting of 08-433 is reflected when "Thick paper 3" is selected.

08-417 of (1) and 08-433 of (2) can be combined.

e-STUDIO520/523/600/603/720/723/850/853

Show Quick Links

Table of Contents