Toshiba e-STUDIO520 Service Handbook page 29

Error code Classification
E261 Paper transport jam
E2A1
E300
E301
E310
E320
E330
E331
E340
E350
E360
E370
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Contents
Option LCF transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the Option LCF.
Transport jam during duplex printing (paper not
reaching intermediate transport sensor): Paper
which has passed the reverse section and horizon-
tal transport section does not reach the intermedi-
ate transport sensor during duplex printing.
3rd drawer transport jam (paper not reaching regis-
tration sensor): Paper which has passed the 1st
drawer transport sensor does not reach the regis-
tration sensor during the feeding at the 3rd drawer.
3rd drawer transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the 3rd drawer.
3rd drawer transport jam (paper not reaching 1st
drawer transport sensor): Paper which has passed
the 2nd transport sensor does not reach the 1st
drawer transport sensor during the feeding at the
3rd drawer.
3rd drawer transport jam (paper not reaching 2nd
drawer transport sensor): Paper which has passed
the 3rd drawer / Tandem LCF transport sensor does
not reach the 2nd drawer transport sensor during
the feeding at the 3rd drawer.
4th drawer transport jam (paper not reaching regis-
tration sensor): Paper which has passed the 1st
drawer transport sensor does not reach the regis-
tration sensor during the feeding at the 4th drawer.
4th drawer transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the 4th drawer.
4th drawer transport jam (paper not reaching 1st
transport sensor): Paper which has passed the 2nd
drawer transport sensor does not reach the 1st
drawer transport sensor during the feeding at the
4th drawer.
4th drawer transport jam (paper not reaching 2nd
drawer transport sensor): Paper which has passed
the 3rd drawer / Tandem LCF transport sensor does
not reach the 2nd drawer transport sensor during
the feeding at the 4th drawer.
4th drawer transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 4th drawer transport sensor
does not reach the 3rd drawer / Tandem LCF trans-
port sensor during the feeding at the 4th drawer.
3rd drawer transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 3rd drawer / Tandem LCF
feed sensor does not reach the 3rd drawer / Tan-
dem LCF transport sensor during the feeding at the
3rd drawer.
2 - 3
Troubleshooting
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
2