Table of Contents
Advertisement
im Vertrieb von
Web Page-Based Setup and Control, cont'd
Scheduling power to receptacles
The Schedule screen on the Configuration tab lets you schedule when power to
the receptacles is turned on and off. You can schedule receptacles individually
to turn on or off at desired times, or you can select a group of receptacles to turn
on or off at one time. Clicking the Clear Schedule button deletes all schedules.
You may want to set up your schedule for a week at a time, or a day at a time.
To access the Schedule screen, click Schedule on the side-bar menu on the
Configuration tab.
Schedule screen showing field for individual receptacle scheduling
Scheduling an individual receptacle
To schedule power on and off to an individual receptacle, follow these steps:
1.
2.
3.
4.
5.
www.camboard.de
4-18
IPL T PCS4 • Web Page-Based Setup and Control
CAMBOARD Electronics
Locate the number of the receptacle that you want to schedule, and click On
or Off in the Power column beside it. A Set Schedule For field opens,
displaying the selected receptacle number, the power selection (On or Off),
and menus from which to select the hour, minute, and AM/PM. (The
illustration above shows the Schedule screen with a Set Schedule For field
displayed for receptacle 2, with power ON at 1:00 p.m. Monday and
Thursday.)
From the pull-down menus, select the time (hour and minutes and AM or
PM) at which you want power turned on or off to the selected receptacle.
Select the check box(es) for the day(s) of the week you want the receptacle to
be turned on and/or off at the time you specified.
When finished, click Set to save your settings for that receptacle.
Repeat steps 1 through 4 for the remaining power schedule setting for the
receptacle you just scheduled, or for other receptacles that you want to
schedule.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
