Table of Contents
Advertisement
im Vertrieb von
Web Page-Based Setup and Control, cont'd
One receptacle, power on or off
Follow this procedure if you want to schedule only powering on or powering off
of one receptacle on one day.
1.
Set Schedule For field to set powering off for a single receptacle
2.
3.
File Management
The File Management Web page allows you to upload and delete files from the
server. File names must contain valid alphanumeric characters and
underscores; spaces and special characters (symbols) are not allowed. Only
personnel with administrator access can view these pages and make changes.
File Management screen with two files uploaded
www.camboard.de
4-20
IPL T PCS4 • Web Page-Based Setup and Control
CAMBOARD Electronics
In the scheduling table, click on the time displayed or the "-" symbol in the
cell beside On or Off for the receptacle number that you want to set, in the
column for the day you want to schedule. A Set Schedule For field appears.
In the following illustration, the red circle indicates the cell that was
selected: receptacle 2, powering off, on Tuesday.
In the Set Schedule For field, select the hour, minute(s), and AM or PM from
the pull-down menus.
Click Set to enter your settings. The time that you entered appears in the
cell that you selected on the Scheduling table.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
