Table of Contents
Advertisement
im Vertrieb von
Web Page-Based Setup and Control, cont'd
Assigning passwords
The Passwords screen allows you to assign passwords to the Administrator and
User access levels. The Administrator password gives access to all IPL T PCS4
Web pages, enabling the administrator to configure the PCS4.
The User password provides access only to the System Status Web page. If you
are logged in as User, you see only the Status tab with the System Status screen.
You cannot make any configuration changes.
To assign passwords:
1.
2.
3.
4.
5.
Passwords screen with Administrator and User passwords entered
6.
Removing passwords
To remove a password, follow these steps:
1.
2.
3.
4.
www.camboard.de
4-12
IPL T PCS4 • Web Page-Based Setup and Control
CAMBOARD Electronics
On the Configuration tab, select Passwords from the side-bar menu.
Enter the new administrator password in the Administrator Password
field.
Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
In the Re-enter Admin Password field, enter the same password again to
confirm it.
If you want to assign a User password, enter it in the User Password field.
You cannot assign a User password unless an Administrator password has
either been assigned or is being assigned at the same time.
Re-enter the same User password in the Re-enter the User Password field.
Click Submit to set the password(s).
Access the Passwords screen on the Configuration tab.
In the Administrator Password and/or the User Password field, delete the
characters that are there, and press the Spacebar to enter a space.
Repeat step 2 in the Re-enter Admin Password and/or the Re-enter User
Password field.
Click Submit.
Deleting the Administrator password also deletes the User password.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
