Ct Group Status Pane - HP StorageWorks XP12000 User Manual

Figure 40 CT Group Status pane
• CT Group: Consistency group number of selected consistency group in the list.
• This CU Type: Registering side (MCU or RCU) of consistency group.
• CLPR: Number and name of the CLPR to which the volumes forming the pair belong.
• S/N, ID: Serial number and SSID of CUs that are components of selected consistency group.
• Port, G-ID, and LUN: Pairs in the connected CU that are in selected consistency group. The G-ID
column shows the host group name or iSCSI target name in parentheses. If the selected port is
connected to an iSCSI target, the iSCSI target name is indicated up to 32 characters.
NOTE:
G-ID, which is a hexadecimal two-digit number, is automatically allocated when using LUN Manager
to create host groups or iSCSI targets.
• The LUN column shows the CU:LDEV in parentheses. For LUs with more than one path, only
the first path is listed.
NOTE:
If # is added to the end of the LDEV number, such as 00:3C#, the LDEV is an external volume. For
details about external volumes, see the
• MCU-RCU Path: Channel type: fibre or serial.
• Time Out (Copy Pending): Maximum delay allowed for Continuous Access XP Async copy (see
Adding consistency groups (Add CT
• Time Out (RCU Ready): Maximum delay allowed for re-establishing MCU-RCU communications
following MCU power-off (see
RCU, this parameter is not displayed.
• Previous button: Displays information about the consistency group before the current consistency
group.
• Next button: Displays information about the consistency group after the current consistency group.
• Refresh button: Refreshes displayed information.
• Close button: Closes the CT Group Status pane.
HP StorageWorks External Storage XP user guide
Group)).
Adding consistency groups (Add CT
.
Group)). If the CU type is
Continuous Access XP user guide
87