HP StorageWorks XP12000 User Manual page 102

• Capacity in MB (up to two decimal places).
• Number of blocks.
• CLPR number and name. CLPR number and name are not displayed under a volume paired
with the local volume.
NOTE:
If an LDEV number contains # at the end (such as 00:3C#), the LDEV is an external volume. For more
information about external volumes, see the
• CLPR: CLPR number and name of the volume on the primary site.
• Group Name:
• Group name: Host group name if the port on the primary site connects a host group.
• iSCSI target: iSCSI target name if the port connects an iSCSI target. The iSCSI target name
is displayed up to 32 characters.
• Pair Status: SMPL, COPY, PAIR, PSUE, PSUS, PDUB, Suspending, or Deleting (see
Access XP volume pair status
the pair is split or suspended, the split/suspended type is also displayed.
• Pair Synchronized: How far the copy operation progressed in percentage and the progress bar.
• RCU S/N and ID: Serial number and SSID of the RCU (or MCU if S-VOL is selected).
• MCU-RCU Path: Channel type of path interface between disk arrays (fibre or serial).
• Update Type: Synchronous or Asynchronous.
• Initial Copy Pace: 1-15 tracks (disabled when status is PAIR).
• Initial Copy Priority: 1-256 (disabled when the status is PAIR).
• P-VOL Fence Level: Conditions under which the MCU rejects write operations to the P-VOL.
• Never: Never fence the operation
• Data: Fence when the MCU cannot successfully execute an update copy operation for any
reason
• Status: Fence only if the MCU cannot change the S-VOL status to the same status as the P-VOL.
• S-VOL Write: Enabled or disabled for this pair (enabled only when pair is split).
• Pair Established: Date and time volume pair was created.
• Last Updated: Date and time volume pair status was last updated.
• Difference Management: Auto, Cylinder, or Track.
• Asynchronous Parameter:
• CT Group: Consistency group to which Continuous Access XP Async pair is assigned.
• Error Level: Error level for Continuous Access XP Async pairs.
• Suspended by: Consistency status (group or LU) of split or suspended Continuous Access XP
Async pair (see Continuous Access XP volume pair
• Consistency time: Consistency time of group to which Continuous Access XP Async pair is
assigned.
• Refresh the Pair Operations pane after this pane is closed check box: To refresh the Pair
Operations pane after closing the Pair Status pane, select the check box. By default, the check
box is not selected.
• Previous button: Changes displayed pair status information to the previous LU on the Volume list
(the LU of the row above).
• Next button: Changes displayed pair status information to the next LU on the Volume list (the
LU of the row below).
• Refresh button: Refreshes pair status information.
• Close button: Closes the Pairdisplay pane.
102
Continuous Access XP for the Array
HP StorageWorks External Storage XP user guide
for further information about Continuous Access XP pair status). If
status) (displayed only at the RCU).
.
Continuous