Usage Monitor Operations; Starting And Stopping Monitoring - HP StorageWorks XP12000 User Manual

Modifying parameters
1.
After performing the CT Group operation, click a consistency group on the list. To modify parameters
for Async Option operation, you do not have to select the row on the list.
2. Right-click, and click Modify. A pane for each operation appears.
3. Modify parameters, and click Set.
4. Click Apply on the Continuous Access XP main pane to apply modifications to the disk array.
Deleting consistency groups
1.
Click the consistency groups on the list.
2.
Right-click, and click Delete. Selected consistency groups are deleted from the list, and the
consistency groups are out of operations.
3. Click Apply on the Continuous Access XP main pane to apply the deletion to the disk array.
For the CT Group operation, the Cancel All command deletes all consistency groups on the list, and all
consistency groups are removed from operations. All consistency groups can also be deleted using the
Delete command and selecting all consistency groups on the list. When all consistency groups are
deleted (by the Cancel All or Delete command), the list status becomes the Volume list.
For the Asynchronous Option operation, the Delete command is not available. You can modify options
set or cancel all option settings made.
NOTE:
After the delete operation of the CT Group Operation command, the Modify command is not available.

Usage Monitor operations

Use the Usage Monitor tab to perform remote copy usage monitoring operations for the connected disk
array. The usage monitoring function collects I/O statistics for all LDEVs on the connected disk array.
Usage monitor operations are:

• Starting and stopping monitoring

• Displaying usage monitor graph
Starting and stopping monitoring
At each data sampling time interval, the usage monitoring function collects 480 pieces of data for each
LDEV and up to 16,385 pieces of data for the entire disk array.
Starting remote copy usage monitoring
1. Click the Usage Monitor tab.
2. Enter the sampling time interval (from 1 to 540 minutes) from the Rate field. A rate of five minutes
or more is recommended.
3.
Click Run in the Operation drop-down list.
4.
Click Apply. A confirmation dialog box appears.
5.
Click OK to confirm. The Status field changes from Stop to Running. Click Cancel to cancel settings.
Monitoring data collect continues, even if the pane is closed, until you stop monitoring operations.
Monitoring data collection continues even if the disk array is rebooted.
Continuous Access XP user guide
93