Creating Continuous Access Xp Volume Pairs (Paircreate); Paircreate (Synchronous) Pane; Paircreate (Asynchronous) Pane - HP StorageWorks XP12000 User Manual

NOTE:
Display Filter settings can affect how the Previous or Next button is recognized. The Volume list can
display 256 rows at one time. Use the Previous and Next buttons to display the previous or next 256
rows.

Creating Continuous Access XP volume pairs (Paircreate)

Use the Paircreate command to create one or more Continuous Access XP pairs. When the Paircreate
command is selected, the Paircreate pane appears. Use the Paircreate pane to select the S-VOL, RCU,
and initial copy options for pairs being created.
NOTE:
Select the appropriate CU image before creating Continuous Access XP pairs.
Figure 48 Paircreate (Synchronous) pane
Figure 49 Paircreate (Asynchronous) pane
• Port - Group - LUN:
• P-VOL: Port number - Group - LUN of the primary volume (P-VOL), CLPR number, and CLPR
name.
NOTE:
If # is added to the end of the LDEV number, such as 00:3C#, the LDEV is an external volume.
For details about external volumes, see the
• S-VOL: Secondary volume (S-VOL). Specify each item as follows: Port: 1A-2R, Group: 00-7F,
LUN: 00-FF. If you select two or more LUs as P-VOLs in the Volume list, select an S-VOL for the
P-VOL of the lowest LUN. S-VOLs for the remainder of the P-VOLs are automatically assigned
according to the LUN. For example, if you select three LUs on the Volume list and select LUN01
as S-VOL for the first P-VOL, S-VOLs of following P-VOLs are LUN02 and LUN03.
HP StorageWorks External Storage XP user guide
Continuous Access XP user guide
.
103