Continuous Access Xp Main Pane (Pair Operation Pane); Volume List - HP StorageWorks XP12000 User Manual

NOTE:
The scripting function is not supported for this version.

Continuous Access XP main pane (Pair Operation pane)

The first pane that appears after clicking the CA tab is the Continuous Access XP main pane, also
known as the Pair Operation pane. To display this pane, click Pair Operation on other Continuous
Access XP panes.
The Continuous Access XP main pane displays information about the selected CU image of the connected
disk array. From this pane, you can configure volume pairs. This section describes components of
the Continuous Access XP main pane. For information about Continuous Access XP volume pair
configuration, see
Information displayed on the Continuous Access XP main pane is updated when the Continuous Access
XP main pane is opened, the tab is switched from one to another, and Refresh ( ) is clicked. The pair
information is also updated by clicking Apply.
The Continuous Access XP main pane contains the following items:
• CU Number/Port Number tree: The Subsystem folder displays CU images, ports, host groups, or
iSCSI targets. Only the CU/port containing LUs appears in the CU Number/Port Number tree.
You can select a CU image, port, host group, or iSCSI target in the CU Number/Port Number tree
to specify information displayed in the Volume list. You can select only one CU image, port, host
group, or iSCSI target. When a CU includes a volume pair in an error suspended status, an error
icon ( ) appears in the CU number/port number.
• Volume list: Information for each volume (LU) of the connected disk array (see
Information displayed in this list is sorted in Port number order by default. Information about LUs
defined for several paths is displayed in several rows (as many as the path defined).
• Display Filter button: Opens the Display Filter pane (see
select volumes displayed in the Volume list. Select volumes by specifying the G-ID, port (if a CU
image is selected), CU image (if a port is selected), pair type (sync and/or async), volume type
(P-VOL and/or S-VOL, internal and/or external VOL), CT group, path type, CLPR, pair status,
and async status.
• Snapshot button: Writes the user-selected Continuous Access XP pair status information to
a text file.
• Previous and Next buttons: In the Volume list, displays eight to twelve rows of LU information
at one time. The 256 rows can be displayed using the scroll bar. The Previous/Next buttons
switches the Volume list to the previous or next 256 rows.

Volume list

This list displays information about each volume (LU) of the connected disk array. Information displayed
in this list is sorted in Port number order by default. Each item can be sorted in ascending or descending
order. To sort items, click the column heading (such as Status or Port). Not all items in the Volume list can
be displayed at one time. To see all items in the list, use the scroll bar below the Volume list.
NOTE:
To change the number of items that can be displayed without scrolling, change the font size.
Performing Continuous Access XP pair operations.
Display Filter pane), which you use to
Continuous Access XP user guide
Volume list).
57