Other Operation Pane - HP StorageWorks XP12000 User Manual

• VOL: CU number and LDEV number of operated volume.
• Paired VOL: CU number and LDEV number of paired volume.
• Copy Time: Time taken for operation (from start of operation to end). Displayed only for
Pairing Complete and Pair Resync. Complete operations.
NOTE:
For Continuous Access XP pairs consisting of LUN Expansion (LUSE) volumes, number of Pair Suspend
(Failure) rows in the history list does not correspond to number of LDEVs in the LUSE volume. For
LUSE volumes with three or more LDEVs, only two rows showing Pair Suspend (Failure) are displayed.
• Previous and Next buttons: Displays up to a maximum of 16,384 operations at one time. Use
these buttons to display the previous or next 16,384 operations.
Dates and times displayed on the History pane are the disk array's date and time, which may or may not
correspond to the local time or host time.

Other Operation pane

The Other Operation pane is used to change subsystem option settings.
The Other Operation pane is updated when the tab is switched from one to another, Refresh is clicked,
and settings are applied.
Figure 26 Other Operation pane
The Other Operation pane contains the following items:
• Tree: Used to select the subsystem.
• List: Subsystem setting information.
• Preset List: Settings before you select Apply to change or delete settings. To change or delete
settings, right-click the Preset List.
• Operation: Status of process in progress.
• No Operation
• Set the System Option
• Apply button: Applies settings to disk subsystems.
68
Continuous Access XP for the Array