Display Filter Pane - HP StorageWorks XP12000 User Manual

• LU: Sequence number of current volume is not same as consistency group.
• OFF: Suspended by the PS OFF by the MCU.
• S/N and ID: Serial number and SSID of the other disk array (MCU or RCU) of the volume pair.
• Port, G-ID, and LUN: Port number, group number (G-ID), and LUN of the other volume of the
volume pair. If the LU is set to more than one path, the LU specified at paircreate is displayed.
NOTE:
If # is added to the end of an LDEV number, such as 00:3C#, the LDEV is an external volume. For
more information about external volumes, see the
• Type: Pair mode: Synchronous or Asynchronous.
• Fence: P-VOL fence level of the Continuous Access XP volume pair: data, status, or never.
• Diff: Information about differential data.
• CTG: Consistency group number of the pair (only for the Asynchronous pairs).
• ErrLvl: Error level of the pair (only for the Asynchronous pairs).
• CLPR: Number and name of the CLPR to which the volumes forming the pairs belong. For more
information about CLPRs, see the HP StorageWorks XP Disk/Cache Partition user guide.
NOTE:
The S/N, SSID, and Fence columns might be blank while the pair is in transition from a pair status to
SMPL. To display the latest information in these columns, refresh the pane.
NOTE:
The first LDEV number of the LU is not displayed.

Display Filter pane

Click Display Filter to open the Display Filter pane, which you can use to select volumes to display on the
Volume list. You can select the G-ID, port number, CU number, pair mode, volume type, consistency
group number, port type, and pair status.
When you select the CU or port number on the CU Number/Port Number tree on the Continuous Access
XP main pane, the selection in the CU Number/Port Number tree has precedence over the specification
in the Display Filter pane. When you select the CU number or G-ID in the tree, the specification on the
Display Filter pane for the CU number or Group number is not available. To make all settings on the
Display Filter pane available, click Subsystem in the CU Number/Port Number tree.
HP StorageWorks External Storage XP user guide
Continuous Access XP user guide
.
59