Viewing Continuous Access Xp Pair Status For Lus And Ldevs (Pairdisplay); Pairdisplay Pane - HP StorageWorks XP12000 User Manual

Modifying LU parameters
1.
Click the LU on the Pair Settings Parameter list.
2.
Right-click, and click Modify. A pane appears.
3. Modify parameters, and click Set.
4. Click Apply on the Continuous Access XP main pane to apply modifications.
Deleting LUs
1.
Click the LUs on the Pair Settings Parameter list.
2.
Right-click, and click Omit. LUs selected in step 1 are deleted from the Pair Settings Parameter list,
and deleted LUs are out of pair settings operations.
3. Click Apply on the Continuous Access XP main pane to apply the deletion.
The Cancel All command deletes all LUs listed on the Pair Settings Parameter list, and all LUs are removed
from pair settings operations. LUs can also be deleted using the Omit command and selecting all LUs
on the Pair Settings Parameter list. When all LUs are deleted (by the Cancel All or Omit command),
the list status becomes the Volume list.

Viewing Continuous Access XP pair status for LUs and LDEVs (Pairdisplay)

The Pairdisplay command displays detailed Continuous Access XP pair status information.
1. From the Volume list, click the LU.
2. Right-click, and click Pairdisplay. The Pairdisplay pane appears. The Pairdisplay command can be
selected if Subsystem, CU number, or Port number is selected in the tree.
Figure 47 Pairdisplay pane
• P-VOL and S-VOL:
• Port - G-ID - LUN (lowest LDEV number for a LUSE pair).
• Device emulation name.
Continuous Access XP user guide
101