Options And Accessories; Remote Emergency Power Off; Remote Monitor Panel; Industrial Relay Card - Powerware 9330 Installation & Operation Manual

Options and Accessories

8.4
Contact your sales representative for information about any of these available
options:
8.4.1

Remote EMERGENCY POWER OFF

A REMOTE EMERGENCY POWER OFF pushbutton is a required option to
provide for situations where you must instantaneously control the UPS output.
The operation of the REMOTE EMERGENCY POWER OFF pushbutton is
described in detail in Chapter 10, "UPS Operating Instructions."
8.4.2

Remote Monitor Panel

An optional Remote Monitor Panel (RMP) contains backlit status indicators and a
local horn, allowing the monitoring of the operational status and alarm condition of
the UPS from virtually any location within the facility. You can install multiple RMPs
at remote locations to increase your monitoring capabilities. This option is
described further in Chapter 11, "Using Features."
8.4.3

Industrial Relay Card

An optional Industrial Relay Card (IRC) uses relay contact closures to indicate the
operating status and alarm condition of the UPS system. This interface allows the
monitoring of the operational status of the UPS equipment using the customer's
monitoring equipment. This option is described further in Chapter 11, "Using
Features."
8.4.4

Battery Cabinets

System protection can be enhanced by equipping the UPS system with one to five
battery cabinets containing sealed lead-acid, maintenance-free batteries, in
addition to the internal batteries. The battery cabinets are designed for line up and
match installation and utilize quick disconnect cables for easy installation. The
cabinets use 24 batteries. Refer to Chapter 3, "Installing and Conecting Batteries",
for recommended battery types.
8.4.5

Communications

Modem
An optional modem is available for use with the Remote Notification feature. See
Chapter 13, "Communications" for additional information.
X-Slot t Communication Bay
Up to four optional X-Slot cards can be installed in the UPS module at any time. The
X-Slot cards support several protocols such as SNMP , HTTP , AS---400, and Modbus
See Chapter 13, "Communications" for additional information.
Powerware 9330 (IBM 9910 20 kVA) Installation and Operation
164201491 REV. B 013004
.
®
8--5