Logging/Trace
Start, Stop and Monitor
3.1 Start and Stop of Logging/Trace Operation
3.1.1 Start and Stop by Tool Software
Overview
The logging/trace operation can be started and stopped by the tool software.
PROCEDURE
1. Select "Tool" > "Logging/Trace Monitor" in the menu bar.
The "Logging/Trace Monitor" dialog box appears.
2. Check the box of a desired LOG number, and press the [Start] button.
A confirmation message appears.
3. Press the [Yes] button.
Starting the logging operation is requested by the operation specified in the
"Logging/Trace Settings" dialog box. System relays relating to the execution of
logging/trace can be monitored in the above dialog box. Once the operation is
started normally, the "Logging/Trace is being executed" and "SD logging is being
executed" flags turn on.
4. For stopping the logging/trace operation, check the box of a desired LOG
number and press the [Stop] button.
Stopping the logging/trace operation is requested. Once the logging/trace
operation ends normally, the "Logging/trace is complete" flag turns on.
3-2