General Configuration Mode; Table 84 Command Summary: Configuration Mode - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide
Table 83 Command Summary: Enable Mode (continued)
COMMAND
running-config
service-control
snmp-server
spanning-tree
system-information
time
timesync
trunk
vlan
vlan1q
traceroute <ip|host-name>
[ttl <1-255>] [wait
<1-60>] [queries <1-
10>]
help
write memory

37.9.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 84 Command Summary: Configuration Mode

COMMAND
admin-password <pw-string>
<confirm-string>
bandwidth- classifier
control <classifier-name>
maximal-bandwidth
<kbps>
broadcast-
storm-control
212
DESCRIPTION
Displays OSPF virtual link settings.
ospf virtual-
link
Displays VRRP settings.
vrrp
Displays current operating configuration.
Displays service control settings.
Displays SNMP settings.
Displays Spanning Tree Protocol (STP)
config
settings.
Displays general system information.
Displays current system time and date.
Displays time server information.
Displays link aggregation information.
Displays the status of all VLANs.
Displays the status of the specified VLAN.
<vlan-id>
Displays GVRP settings.
gvrp
Displays port isolation settings.
port-isolation
Determines the path a packet takes to a
device.
Displays command information.
Saves current configuration to the
configuration file the switch is currently
using.
inactive
Chapter 37 Introducing the Commands
DESCRIPTION
Changes the administrator
password.
Enables bandwidth control for a
traffic flow.
Disables bandwidth control for a
traffic flow.
Enables broadcast storm
control on the switch.