Firmware Version 4.7 Sp6 - Siemens SINAMICS G120 Operating Instructions Manual

A.1.2

Firmware version 4.7 SP6

Table A-2 New functions and function changes in firmware 4.7 SP6
Function
1 Support for the Power Module PM240-2, FSF frame sizes
Support of PM240P‑2 Power Modules frame sizes FSD ... FSF
Support of safety function Safe Torque Off (STO)via the terminals of the
PM240‑2 Power Module, frame size FSF and PM240P‑2 Power Module
FSD ... FSF
You can find additional information in the "Safety Integrated" function man‐
ual.
Overview of the manuals (Page 537)
2 Support for Power Module PM330 JX frame size
3 Support for 1PC1 induction motors
4 The control of synchronous reluctance takes into account the inductance
of the output reactor.
5 Support of motor temperature sensor Pt1000
6 New p4621 parameter for disabling PTC short-circuit monitoring
7 Revision of the thermal motor model for protecting the motor against dam‐
age due to overheating in the stator or rotor
8 Changing the quick commissioning in the "Standard Drive Control" appli‐
cation class:
The motor data identification is no longer permanently set to p1900 = 12;
instead, users select the appropriate motor data identification.
Factory setting: p1900 = 2.
9 The free function blocks are also available in the SINAMICS G120C.
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Changes in the current manual (Page 5)
A.1 New and extended functions
SINAMICS
G120
- - ✓ ✓ ✓ ✓
- - ✓ ✓ ✓ -
- - - - ✓ ✓
- - ✓ - - -
✓ ✓ ✓ ✓ ✓ ✓
- - ✓ - - -
✓ ✓ ✓ ✓ ✓ ✓
- - - - - -
✓ ✓ ✓ ✓ ✓ ✓
- ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓
Appendix
G120D
- - -
- - -
- - -
- - -
✓ ✓ ✓
- - -
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
- - -
✓ - -
517