Network Settings; Configuring Network Settings; Sample Ssl Vpn Concentrator Configuration - NETGEAR ProSafe SSL312 Reference Manual

This chapter describes how to configure network and IP settings. These settings should be
configured by a network administrator. The Network settings to be configured include:
•

Configuring Network Settings

• Network Interface Configuration
• Network Route Configuration
• Network Host Table Settings
• Configuring DNS Settings
Configuring Network Settings
The IP settings and interface settings of the SSL VPN Concentrator appliance may be configured
through the Network screen under the System Configuration menu on the left navigation panel.
From the Network window, an SSL VPN Concentrator administrator can
• Set the Ethernet Port 1 and Ethernet Port 2 addresses.
• Define the default network route and add additional static IP routes.
• Map host names or fully qualified domain names to IP addresses.
• Manage SSL Certificates (as described in
Warning: These advanced network settings should only be configured by a network
administrator.

Sample SSL VPN Concentrator Configuration

In the following network configuration example, the SSL VPN Concentrator appliance is deployed
as a standalone SSL VPN device. A separate access router or firewall performs perimeter security.
• Interface Ethernet Port 1 IP address: 192.168.1.1
"Certificate Management" in Chapter
v1.0, August 2006
Chapter 5

Network Settings

4).
5-1