How To Log In To The Wg302 Using Its Default Ip Address - NETGEAR WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

How to Log In to the WG302 Using Its Default IP Address

192.168.0.228 is the default IP address of your access point. The WG302 is set, by default, the
1.
DHCP client to be disabled.
Note: The computer you are using to connect to the WG302 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
Open a Web browser such as Internet Explorer or Netscape Navigator.
2.
Connect to the WG302 by entering its default address of
3.
browser.
A login window like the one shown below opens:
4.
Figure 3-6: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the WG302 Access Point and display the home page, as shown in
page" on page 3-7.
3-11
http://192.168.0.228
Basic Installation and Configuration
September 2004
into your
"Login result: WG302 home