Logging In To The Wg102 Using Its Default Ip Address - NETGEAR ProSafe WG102 Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

Logging in to the WG102 Using Its Default IP Address

The default IP address of your access point is 192.168.0.229. The WG102 is set, by default, for the
DHCP client to be disabled.
Note: The computer that you use to connect to the WG102 should be configured with an
IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
1. Open a Web browser such as Internet Explorer or Netscape Navigator.
2. Connect to the WG102 by entering its default address of http://192.168.0.229 into your
browser.
Figure 3-5
3. A login window like the one shown below opens:
Figure 3-6
4. Log in use the default user name of admin and default password of password.
Once you have entered your access point name, the Web browser finds the WG102 Access
Point and displays the main menu as shown in Figure 3-2 on page
v1.0, November 2005
3-6.
3-9