Remove The Air Baffle - Lenovo ThinkSystem SR650 Maintenance Manual

CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.

Remove the air baffle

Use this information to remove the air baffle.
Before removing the air baffle:
1. Remove the top cover. See "Remove the top cover" on page 103.
2. If there is a RAID super capacitor module installed on the air baffle, disconnect the RAID super capacitor
module cable first.
3. If you are removing the air baffle for server models with a GPU installed, remove the GPU first. See
"Remove a GPU" on page 157.
To remove the air baffle, complete the following step:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1. Grasp the air baffle and carefully lift it out of the server.
Attention: For proper cooling and airflow, install the air baffle before you power on the server.
Operating the server with the air baffle removed might damage server components.
108
ThinkSystem SR650 Maintenance Manual