Server models with eight 2.5-inch drives
Use this section to understand the cable routing for server models with eight 2.5-inch drives.
Server model: eight 2.5-inch SAS/SATA drives, the rear hot-swap drive assembly, one 16i RAID
adapter
Figure 22. Cable routing for server models with eight 2.5-inch SAS/SATA drives, the rear hot-swap drive assembly, and
one 16i RAID adapter
Cable
1
Power cable for front backplane
2
SAS signal cable for front
backplane
3
SAS signal cable for the rear hot-
swap drive assembly
From
Power connector on front backplane
SAS 0 and SAS 1 connectors on front
backplane
Signal connector on the rear hot-
swap drive assembly
To
Backplane power connector 1 on the
system board
C0 and C1 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
C2 connector on the 16i RAID
adapter installed on the RAID adapter
slot
.
Chapter 2
Server components
33