Figure 83. System fan removal
Step 1.
Grasp the top of the system fan with your fingers.
Step 2.
Lift the system fan out of the server.
After removing the system fan:
1. Install a new system fan or install a fan filler to cover the place. See "Install a system fan" on page 114.
2. If you are instructed to return the old system fan, follow all packaging instructions and use any
packaging materials that are provided.
Install a system fan
Use this information to install a system fan. You can install a hot-swap fan without powering off the server,
which helps you avoid significant interruption to the operation of the system.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
114
ThinkSystem SR650 Maintenance Manual