Lenovo ThinkSystem SR650 Maintenance Manual page 104

Figure 62. ID label plate removal
To remove the rack latches, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku: http://list.youku.com/albumlist/show/id_50483444
Step 1. Do one of the following:
• If the rack latches are not assembled with a VGA connector or the front I/O assembly, go to the
next step.
• If the rack latches are assembled with a VGA connector, the front I/O assembly, or both,
complete the following steps:
1. Disconnect the VGA cable
system board.
96
ThinkSystem SR650 Maintenance Manual
1 , the front-I/O-assembly cable 2 , or both cables from the