Rack front
Figure 22. Securing the server to the front of the rack
Rack latch
1
Thumbscrew
2
After you finish
1. Reconnect the power cords and any cables that you removed.
2. Power on the server and any peripheral devices. See
3. Update the server configuration. See
Air baffle replacement
Follow instructions in this section to remove and install the air baffle.
The air baffle varies by the server hardware configuration. Refer to
appropriate air baffle for your server. The replacement procedures for the air baffles are the same.
•
"Remove the air baffle" on page 50
•
"Install the air baffle" on page 52
Remove the air baffle
Follow instructions in this section to remove the air baffle.
About this task
ThinkSystem SR655 V3 User Guide
50
"Power on the server" on page
"Complete the parts replacement" on page
42.
151.
"Thermal rules" on page 41
to select the