Figure 113. Riser 2 assembly installation
4. Complete the parts replacement. See "Completing the parts replacement" on page 203.
PCIe adapter replacement
Use this information to remove and install a PCIe adapter.
The PCIe adapter can be an Ethernet adapter, a host bus adapter, a RAID adapter, a PCIe solid-state drive,
or any other supported PCIe adapters. PCIe adapters vary by type, but the installation and removal
procedures are the same.
Note: For a list of the supported PCIe adapters, see:
http://www.lenovo.com/us/en/serverproven/
Remove a PCIe adapter
Use this information to remove a PCIe adapter.
This topic contains the following information:
• "Remove a PCIe adapter from the riser assembly" on page 151
• "Remove a PCIe adapter from the system board" on page 153
Remove a PCIe adapter from the riser assembly
Use this information to remove a PCIe adapter from the riser assembly.
.
151
Chapter 3
Hardware replacement procedures