Table of Contents
Advertisement
Table 72. Lock/unlock directions on the top cover latch
Unlock
1
Step 2.
Press and hold on the blue tab of cover release latch; then, rotate the tip of the latch up.
Step 3.
Push the latch forward to slide the top cover away from the server.
Figure 49. Top cover removal
Step 4.
Lift the cover, remove it from the server, and set it aside.
Demo video
Watch the procedure on YouTube
Remove the processor and memory expansion tray or the system air
baffle
Follow the instructions in this section to remove the processor and memory expansion tray or the system air
baffle.
Depending on the configuration, one of the following need to be removed before some optional components
are installed.
• Processor and memory expansion tray (see
90).
• System air baffle and power interposer (see
interposer" on page
88).
Remove the system board air baffle and the power interposer
Use this procedure to remove the system board air baffle and the power interposer.
To remove the system board air baffle, complete the following steps:
Step 1.
Slightly slide power supply 2 out from the power supply bay (see "Remove a hot-swap power
supply unit" in ThinkSystem SR850 Maintenance Manual).
ThinkSystem SR850 Setup Guide
88
Lock
2
"Remove the processor and memory expansion tray" on page
"Remove the system board air baffle and the power
Advertisement
Table of Contents
