Disabling A Module - Avaya Virtual Services Platform 9000 Series Configuration Manual

Ethernet module configuration using EDM
CardAssemblyDate
CardHWConfig
AdminStatus
OperStatus
ModuleType
ModuleDescription
ModuleSerialNo
ModulePartNo
ModuleDateCode
ModuleHWConfig
PowerManagementPriority
Slot Power

Disabling a module

Disable an Ethernet module before you remove it from the chassis to minimize traffic loss.
Traffic does not flow on a disabled module.
1. In the Device Physical View tab, select a module.
2. In the navigation tree, open the following folders: Configuration > Edit.
3. Click Card.
4. Select down.
5. Click Apply.
20 Configuration — Ethernet Modules
Name Description
The assembly date of the card.
The card hardware configuration.
The administrative status of the card. Use
this field to enable, disable, or reset the
card.
The current operational status of the card.
The module type.
The module description.
The module serial number.
The module part number.
The module date code.
The module hardware configuration.
The power management priority setting.
The status of slot power.
June 2011