Connecting The Lan Ethernet Cable; Connecting The Pc Ethernet Cable - Avaya 1210 User Manual

Installing your Avaya 1210 IP Deskphone

Connecting the LAN Ethernet cable

Note: Your Avaya 1210 IP Deskphone supports both AC power and
PoE options, including IEEE 802.3 standard power. To use local AC
power, you can order separately the optional AC adapter. To use
PoE, where power is delivered over the CAT5 cable, the LAN must
support PoE, and you do not need an AC adapter.
Connect your IP Deskphone to your LAN using a
enable full functionality of your IP Deskphone. If your Ethernet port is
equipped with Power over Ethernet (PoE), your IP Deskphone can be
powered through the LAN port. Do not extend the LAN Ethernet cable
outside the building.
1. Plug one end of the supplied LAN Ethernet cable into the LAN
Ethernet port on the back of your IP Deskphone marked with the
symbol.
2. Thread the cable through the channel in the foot stand.
3. Connect the other end of the cable to your LAN Ethernet connection.
The LAN LED on the back of the IP Deskphone lights when a LAN
connection is established.
Figure 3 on page 37
Deskphone.

Connecting the PC Ethernet cable

Connect the
CAT5e
your computer to enable your computer to access the LAN.
1. Plug one end of the PC Ethernet cable (not supplied) into the PC
Ethernet port on the back of your IP Deskphone marked with the
symbol.
2. Thread the cable through the channel in the foot stand.
3. Connect the other end of the cable to the LAN port on your computer.
40
shows the connections on the back of the IP
PC Ethernet cable between your IP Deskphone and
Ethernet cable to
CAT5e
%
(