Connecting The Power (Optional) - Avaya 1210 User Manual

1. Plug the headset cord into the headset jack on the back of the IP
Deskphone marked with the
Figure 3 on page 37
Deskphone.
2. Thread the cord through the channel in the side of the foot stand.
3. Set up the headset according to the headset instructions.

Connecting the power (optional)

Your IP Deskphone supports AC power and Power over Ethernet (PoE).
For AC power, use only the Avaya-approved Global Power Supply
(N0146475) and the country-specific IEC cable that you can order
separately. To use PoE, your connected LAN must support PoE.
Note: Your Avaya 1210 IP Deskphone supports AC power and PoE
options, including IEEE 802.3 standard power. To use local AC
power, you can order the optional AC adapter separately. To use
PoE, where power is delivered over the CAT5 cable, the LAN must
support PoE, and you do not require an AC adapter.
1. Connect the DC barrel connector to the power jack on the back of the
IP Deskphone.
2. Thread the cable through the channel in the foot stand to secure the
cable.
3. Plug the country-specific IEC cable into the Global Power Supply,
and then plug the Global Power Supply into the nearest AC power
outlet.
Installing your Avaya 1210 IP Deskphone
)
symbol.
shows the connections on the back of the IP
CAUTION
Use your Avaya 1210 IP Deskphone with
the approved Avaya AC Adapter (model
#N0089601).
39