Polycom SoundStructure C16 Design Manual page 454

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
get eth_mac 1
A - 112
Description
This parameter selects the method for obtaining the IP address of the ethernet
port.
eth_mac Get Ethernet MAC Address
Argument
Channel Type
Value Type
Read/Write Mode
System Limits
Description
This parameter gets the MAC address for the system's Ethernet port. The value
will be formatted in all lowercase with bytes separated by a colon, for example
"00:04:f2:bf:00:01".
Examples
Response
val eth_mac 1
"00:04:f2:bf:00:01"
ir_key_press Key Pressed On IR Remote
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Description
When queried, this parameter returns the keycode value of the last key that
was pressed on the IR remote. As an event, a status message is generated
whenever a key is pressed on the IR remote.
Argument value
Device-Specific System
String
Read-Only
Max String Length: 17
Description
Queries the ethernet mac address on device 1.
Argument value
Virtual Channel
Integer
Read-Only
Infrared Remote Input
Control
Minimum: 0, Maximum: 255