Polycom SoundStructure C16 Design Manual page 453

Command
set eth_settings 1
"mode='dhcp'"
set eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
get eth_settings 1
set eth_settings 1 "mode='dhcp'"
val eth_settings 1 "mode='dhcp',addr='172.22.2.129',dns='172.22.1.1
172.22.1.2',gw='172.22.2.254',nm='255.255.255.0'"
Static IP Example
set eth_settings 1
"mode='static',addr='172.22.2.200',dns='172.22.1.1',gw='172.22.2.254',nm='255.
255.255.0'"
val eth_settings 1
"mode='static',addr='172.22.2.200',dns='172.22.1.1',gw='172.22.2.254',nm='255.
255.255.0'"
Examples
Response
val eth_settings 1
"mode='dhcp',addr='172.
22.2.129',dns='172.22.1.1
172.22.1.2',gw='172.22.2.
254',nm='255.255.255.0'"
val eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
val eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
eth_ip_mode Select Method For Obtaining IP Address
Argument
Channel Type
Value Type
Read/Write Mode
Values
Description
Sets the ethernet settings on device 1 to dhcp and
returns the full ethernet settings.
Sets the ethernet settings on device 1 to the static IP
address of 192.168.10.63 and returns the full ethernet
settings. All parameters must be specified even if just
changing one parameter.
Queries the ethernet settings on device 1.
Argument value
Device-Specific System
List
Read/Write
static : Static IP Address
dhcp : Dynamic IP Address via DHCP (default)
Command Protocol Reference Guide
A - 111