Polycom SoundStructure C16 Design Manual page 89

Customizing SoundStructure Designs
Collapse buttons respectively.
To create additional virtual channel groups, click the Edit Groups button on
the Channels page to cause the Edit Groups screen to appear as shown in the
following figure. All existing virtual channel groups will appear on the right
of the screen. Virtual channels can be in more than one virtual channel group.
For example, "Table Mic 1" can be in the virtual channel group "Mics" and
"Zone 1 Mics" at the same time.
To add a new virtual channel group, enter a group name in the Group Label:
field and then click the Add Group button as shown in the following figures.
This example shows an example of creating the "Zone 1 Mics" virtual channel
group.
5 - 9