Polycom SoundStructure C16 Design Manual page 374

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
set line_out_gain
"Amplifier" -10
Command
A - 32
Argument
Virt Chans
System Limits
Default
User Limits
Supported
Description
This parameter sets the gain (in dB) of the line output.
Examples
Response
val line_out_gain
"Amplifier" -10
mic_in_gain Mic Input Pre-Amp Gain
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Default
User Limits
Supported
Description
This parameter sets the gain (in dB) of the mic pre-amp. A separate mic/line
control is not provided. Instead, a continuous gain range is provided, and the
firmware will map this to the appropriate mic/line switch and pre-amp gain
settings.
Examples
Response
Argument value
Mono, Stereo
Minimum: -100.0, Maximum: 20.0, Resolution: 0.5
0.0
No
Description
Sets the line_out_gain on the output channel "Amplifier"
to -10dB.
Argument value
Virtual Channel
Floating-Point
Read/Write
Conferencing Mic/Line Input, Sound Reinforcement Mic/Line
Input
Mono, Stereo
Minimum: -20.0, Maximum: 64.0, Resolution: 0.5
0.0
No
Description