Polycom SoundStructure C16 Design Manual page 390

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 48
Argument Argument value
System Limits Minimum: 100, Maximum: 5000
Default 100
User Limits No
Supported
Description
This parameter sets the delay (in milliseconds) for the phone_flash parameter.
Note that by default, PSTN interfaces use the flash delay determined by their
pstn_country setting. However, they can use the value of this parameter if the
pstn_flash_delay_override parameter is set to 1.
phone_redial Redial The Last Number On The Telephony Interface
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans Analog Telephony Output
Virt Chans Mono
Description
Setting this parameter causes the last number to be redialed on the telephony
interface. The last number is defined as all the digits that were dialed since the
telephony interface was last connected (see the phone_connect parameter). Like
the phone_dial parameter, if the telephony interface is not already connected
when this parameter is set, the digits will not be dialed. The phone must be
taken off hook by setting phone_connect to 1 before the digits can be dialed.
phone_ring Ring Indicator For Telephony Interface
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read-Only
Phys Chans Analog Telephony Input
Virt Chans Mono