Polycom SoundStructure C16 Design Manual page 385

Command
set
phone_auto_answer_en
"Phone In" 1
Command
phone_auto_answer_en Enable Auto-Answer For Telephony Interface
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Description
This parameter enables (1) or disables (0) the auto-answer feature for the
telephony interface.
Examples
Response
val
phone_auto_answer_en
"Phone In" 1
phone_connect Connect Or Disconnect Telephony Interface
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Description
This parameter sets the connection status of the telephony interface. Setting
the phone_connect status to 1 connects the call, while setting it to 0 disconnects
the call.
Examples
Response
Argument value
Virtual Channel
Boolean
Read/Write
Analog Telephony Input
Mono
0
Description
Sets the phone associated with the virtual channel
"Phone In" to autoanswer when the phone rings. Note
that the phone in virtual channel name must be used, not
the phone output virtual channel name.
Argument value
Virtual Channel
Boolean
Read/Write
Analog Telephony Output
Mono
0
Description
Command Protocol Reference Guide
A - 43