Polycom SoundStructure C16 Design Manual page 376

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
set phantom "Table
Mic 1" 1
Command
set safety_mute 1
set safety_mute 0
A - 34
phantom 48 V Phantom Power
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Description
Enables or disable phantom power on mic inputs. Setting phantom to 1 enables
phantom power, while setting it to 0 disables phantom power.
Examples
Response
val phantom "Table
Mic 1" 1
safety_mute Safety Mute
Argument
Channel Type
Value Type
Read/Write Mode
Default
Description
This parameter sets the status of the safety mute. If safety mute is enabled (1),
all line outputs of all the devices are muted.
Examples
Response
val safety_mute 1
val safety_mute 0
Argument value
Virtual Channel
Boolean
Read/Write
Conferencing Mic/Line Input, Sound Reinforcement Mic/Line
Input
Mono, Stereo
0
Description
Enables the 48V phantom power supply for the input channel
"Table Mic 1".
Argument value
Global System
Boolean
Read/Write
0
Description
Enables the safety_mute for a SoundStructure system.
Turns off the safety_mute for a SoundStructure system.