SiENBE04-925_A
To use ON TIMER operation
•
1. Press "ON TIMER button".
2. Press "SELECT button" until the time setting
3. Press "ON TIMER button" again.
To cancel the ON TIMER operation
4. Press "CANCEL button".
To combine ON TIMER and OFF TIMER
ATTENTION
In the following cases, set the timer again.
•
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote control.
Operation Manual
Check that the clock is correct.
If not, set the clock to the present time.
6:00
•
"
" is displayed on the LCD.
" ON " blinks.
•
reaches the point you like.
•
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
•
The TIMER lamp lights up.
•
The TIMER lamp goes off.
•
A sample setting for combining the two
timers is shown below.
(Example)
Present time: 23:00
(The unit operating)
OFF TIMER at 0:00
Combined
ON TIMER at 14:00
Operation Manual
4
2
1, 3
63