On/Off Timer Operation - Daikin RXYMQ3AV4A Operation Manual

ON/OFF TIMER Operation

• The timer is operated by the following two ways.
Programming the stop time (
Programming the start time (
• The timer can be programmed for a maximum of 72 hours.
• The start and the stop time can simultaneously be programmed.
1.
Press the TIMER MODE START/STOP button several times and select the mode on the display.
The display flashes.
For setting the timer stop..."
For setting the timer start..."
2.
Press the PROGRAMMING TIME button and set the time for stopping or starting the system.
When this button is pressed, the time advances by 1 hour.
When this button is pressed, the time goes backward by 1 hour.
3.
Press the TIMER ON/OFF button.
The timer setting procedure ends. The display "
NOTE:
• When setting the timer Off and On at the same time, repeat the above procedure (from 1 to 3) once again.
• After the timer is programmed, the display shows the remaining time.
• Press the TIMER ON/OFF button once again to cancel programming. The display vanishes.
For example:
When the timer is programmed to stop the system after 3 hours and start the system after 4
hours, the system will stop after 3 hours and then 1 hour later the system will start.
) ........ The system stops operating after the time setting has elapsed.
) ......... The system starts operating after the time setting has elapsed.
BRC1C62
hr
C
1
3
TEST
2
"
"
or
H
" changes from flashing light to a constant light.
12