Daikin FTXL20G2V1B Service Manual page 67

Heat pump/indoor/outdoor units, inverter pair wall mounted type g-series
Hide thumbs Also See for FTXL20G2V1B:
Table of Contents

Advertisement

SiENBE04-925_A
„ To change the airflow rate setting
6. Press "FAN setting button".
DRY mode
The airflow rate setting is not variable.
NOTE
„ Note on HEAT operation
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity
becomes smaller in lower outdoor temperatures. If the heating effect is insufficient, it is recommended to use
another heating appliance in combination with the air conditioner.
The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT
operation, it takes some time before the room gets warmer.
In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the
system switches into defrosting operation to take away the frost.
During defrosting operation, hot air does not flow out of indoor unit.
A pinging sound may be heard during defrosting operation, which, however does not mean that the air
conditioner has failures.
„ Note on COOL operation
This air conditioner cools the room by blowing the hot air in the room outside, so if the outside temperature is
high, the performance of the air conditioner drops.
„ Note on DRY operation
The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It
automatically controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
„ Note on AUTO operation
In AUTO operation, the system selects a temperature setting and an appropriate operation mode (COOL or
HEAT) based on the room temperature at the start of the operation.
The system automatically reselects setting at a regular interval to bring the room temperature to user-setting
level.
If you do not like AUTO operation, manually change the set temperature..
„ Note on FAN operation
This mode is valid for fan only.
„ Note on airflow rate setting
At smaller airflow rates, the cooling (heating) effect is also smaller.
Operation Manual
Indoor unit quiet operation
When the air flow is set to
Use this when making the noise quieter.
AUTO or COOL or HEAT or FAN mode
Five levels of airflow rate setting from "
"
"
plus "
, the noise from the indoor unit will become quieter.
"
"
Operation Manual
" "
" are available.
" to
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents