C San Switch Technical Specifications; General Specifications - HP 16Gb SAN User Manual

C SAN Switch technical specifications

General specifications

Table 1 1 (page 32)
Table 1 1 General specifications
Specification
Configurable port types
Media types
EMC emissions
EMC immunity
System architecture
ANSI protocol
Modes of operation
Maximum frame size
Port-to-port latency
32 SAN Switch technical specifications
lists general specifications for the 16Gb SAN Switch.
Description
F_Port, FL_Port, and E_Port
SFP. Support for speeds of 4/8/16Gb with short wave SFPs
up to 500m (1,640 ft.) and support for speeds of 4/8/16Gb
with long wave SFPs up to 10 km.
NOTE: 8Gb SFPs support 2/4/8 Gb, and the 16 Gb SFPs
support 4/8/16 Gb
An operating SAN Switch conforms to the emissions
requirements specified by the following regulations:
FCC Rules and Regulations, Part 15 subpart B, Class A
CSA C108.8 Class A
VCCI Class A ITE
CISPR 22 Class A
EN55022 Class A
AS/NZF 3548: 1995 Class A
CNS13438 Class A
ICES-003 Class A
Korean EMC Requirements
BSMI Standard CNS 13438
EMC Directive 89/336/EEC
EN5022 Level A
EN50082-2/EN55024: 1998
IEC 61000-4-2 Severity Level 3 for Electrostatic Discharge
IEC 61000-4-3 Severity Level 3 for Radiated Fields
IEC 61000-4-4 Severity Level 3 for Fast Transients
IEC 61000-4-5 Severity Level 3 for Surge Voltage
IEC 61000-4-6 Conducted Emissions
IEC 61000-4- 1 1 Voltage Variations
EN 61000-4- 1 2 Oscillatory Waves Immunity
EN 61000-3-2 Limits for Harmonic Current Emissions
EN 61000-3-3 JEIDA
Nonblocking shared-memory switch
FC-PH (FC Physical and Signalling Interface standard)
FC Class 2, Class 3, and Class F
21 12-byte
Less than 2 microseconds with no contention (destination port
is free)