undo super authentication-mode
Default
Local password authentication applies.
Views
System view
Predefined user roles
network-admin
Parameters
local: Enables local password authentication.
scheme: Enables remote AAA authentication.
Usage guidelines
The authentication setting applies only to AUX, VTY, and TTY users. A console user can obtain the user
role without authentication.
For local password authentication, use the super password command to set a password.
For remote AAA authentication, set the username and password on the RADIUS or HWTACACS server.
If you specify both local and scheme keywords, the keyword first entered in the command takes
precedence, as follows:
scheme local—Enables remote-then-local authentication mode. The device first performs AAA
•
authentication to obtain a temporary user role. If the remote HWTACACS or RADIUS server does
not respond, or if the AAA configuration on the device is invalid, local password authentication is
performed.
local scheme—Enables local-then-remote authentication mode. The device first performs local
•
password authentication. If no password is configured for the user role, the device performs remote
authentication.
For more information about AAA, see Security Configuration Guide.
Examples
# Enable local-only authentication for temporary user role authorization.
<Sysname> system-view
[Sysname] super authentication-mode local
# Enable remote-then-local authentication for temporary user role authorization.
<Sysname> system-view
[Sysname] super authentication-mode scheme local
Related commands
•
authentication super (Security Command Reference)
super password
•
super password
Use super password to set a password for a user role.
Use undo super password to restore the default.
34