Configuring Static Multicast Mac Address Entries - HP MSR1002-4 Configuration Manual

Flexnetwork msr series
Hide thumbs Also See for MSR1002-4:
Table of Contents

Advertisement

TIP:
You do not need to enable IP multicast routing before this configuration.
To configure a multicast forwarding boundary:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure the interface as a
multicast
boundary for a multicast
group range.

Configuring static multicast MAC address entries

In Layer 2 multicast, multicast MAC address entries can be dynamically created or added through
Layer 2 multicast protocols (such as IGMP snooping). You can also manually configure static
multicast MAC address entries by binding multicast MAC addresses and ports to control the
destination ports of the multicast data.
TIP:
You do not need to enable IP multicast routing before this configuration.
The multicast MAC address that can be manually configured in the multicast MAC address entry must be
unused. (A multicast MAC address is the MAC address in which the least significant bit of the most
significant octet is 1.)
You can configure static multicast MAC address entries on the specified interfaces in system view or
on the current interface in interface view.
To configure a static multicast MAC address entry in system view:
Step
1.
Enter system view.
2.
Configure a static multicast
MAC address entry.
To configure a static multicast MAC address entry in interface view:
Step
1.
Enter system view.
2.
Enter
interface/Layer 2 aggregate
interface view.
3.
Configure a static multicast
MAC address entry.
Command
system-view
interface
interface-number
multicast
forwarding
group-address { mask-length |
mask }
Command
system-view
mac-address
mac-address
interface-list vlan vlan-id
Command
system-view
Layer
2
Ethernet
interface
interface-number
mac-address
mac-address vlan vlan-id
interface-type
boundary
multicast
interface
interface-type
multicast
48
Remarks
N/A
N/A
By default, an interface is not a
multicast forwarding boundary.
Remarks
N/A
By default, no static multicast
MAC address entries exist.
Remarks
N/A
N/A
By default, no static multicast
MAC address entries exist.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents