Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
22-6
The PROBe command specifies the attenuation factor for an external
probe connected to a channel. The command changes the channel voltage
references such as range, offset, trigger levels and automatic
measurements. The actual sensitivity is not changed at the channel input.
The allowable probe attenuation factor is an integer from 1 to 1ooO.
The query returns the probe attenuation factor for the selected channel.
:: = integer from 1 to loo0
OUTPUT XXX;":SCOPe:CHANl:PROB
1 I2}:PROBe]
10 DIM Att$[lOO]
20 OUTPUT XXX;": SCOPE:CHANNELl:PROEE?"
30 ENTER XXX;Att$
40 PRINT AttJ
50 END
command/query
10"