Table of Contents
Advertisement
KEY
Note #b
Command Syntax:
where:
Example:
HP 16528/1663B
The KEY command allows you to simulate pressing a specified
front-panel key. Key commands may
that is legal from the front panel. Be sure the instrument is in a desired
setup before executing the KEY command. Key codes range from 0 to 36
with 99 representing no key (returned at power-up). See table 6-l for key
codes.
The external KEY buffer is only two keys deep; therefore, attempting to
send KEY commands too rapidly will cause a KEY buffer overflow error
to be displayed on the HP 1652B/53B screen.
The KEY query returns the key code for the last front- panel key pressed
or the last simulated key press over the bus.
<key-code >
:: = integer from 0 to 36
OUTPUT XXX;":SYSTEM:KEY
24"
command/query
be
sent over the bus in any order
System Commands
KEY
6-23
Advertisement
Table of Contents
